moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) ?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 ja n uary 2009 moc3010m, moc3011m, moc3012m, moc3020m, moc3021m, moc3022m, moc3023m 6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) features excellent i ft stability?r emitting diode has low degradation high isolation voltage?inimum 5300 vac rms underwriters laboratory (ul) recognized file #e90700 peak blocking voltage ? 250v-moc301xm ? 400v-moc302xm vde recognized (file #94766) ? ordering option v (e.g. moc3023vm) applications industrial controls solenoid/valve controls traffic lights static ac power switch vending machines incandescent lamp dimmers solid state relay motor control lamp ballasts description the moc301xm and moc302xm series are optically isolated triac driver devices. these devices contain a gaas infrared emitting diode and a light activated silicon bilateral switch, which functions like a triac. they are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 vac operations. schematic package outlines main term. nc* n/c *do not connect (triac substrate) 1 2 3 anode cathode 4 5 6 main term.
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 2 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) absolute maximum ratings (t a = 25? unless otherwise noted) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. note: 1. isolation surge voltage, v iso , is an internal device dielectric breakdown rating. for this test, pins 1 and 2 are common, and pins 4, 5 and 6 are common. symbol parameters device value units tot al device t stg storage temperature all -40 to +150 ? t opr operating temperature all -40 to +85 ? t sol lead solder temperature all 260 for 10 sec ? t j j unction temperature range all -40 to +100 ? v iso isolation surge voltage (1) (peak ac voltage, 60hz, 1 sec. duration) all 7500 vac(pk) p d t otal device power dissipation @ 25? ambient derate above 25? all 330 mw 4.4 mw/? emitter i f continuous forward current all 60 ma v r reverse voltage all 3 v p d t otal power dissipation @ 25? ambient derate above 25? all 100 mw 1.33 mw/? detector v drm off-state output terminal voltage moc3010m/1m/2m moc3020m/1m/2m/3m 250 400 v i tsm p eak repetitive surge current (pw = 1ms, 120pps) all 1 a p d t otal power dissipation @ 25? ambient derate above 25? all 300 mw 4 mw/?
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 3 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) electrical characteristics (t a = 25? unless otherwise speci?d) individual component characteristics t ransfer characteristics notes: 2. test voltage must be applied within dv/dt rating. 3. all devices are guaranteed to trigger at an i f value less than or equal to max i ft . therefore, recommended operating i f lies between max i ft (30ma for moc3020m, 15ma for moc3010m and moc3021m, 10ma for moc3011m and moc3022m, 5ma for moc3012m and moc3023m) and absolute max i f (60ma). symbol parameters test conditions device min. typ. max. units emitter v f input forward voltage i f = 10ma all 1.15 1.5 v i r reverse leakage current v r = 3v, t a = 25? all 0.01 100 ? detector i drm p eak blocking current, either direction rated v drm , i f = 0 (2) all 10 100 na v tm p eak on-state voltage, either direction i tm = 100 ma peak, i f = 0 all 1.8 3 v symbol dc characteristics test conditions device min. typ. max. units i ft led trigger current voltage = 3v (3) moc3020m 30 ma moc3010m 15 moc3021m moc3011m 10 moc3022m moc3012m 5 moc3023m i h holding current, either direction all 100 ?
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 4 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) typical performance curves ambient temperature - t a ( o c) -40 -20 0 20 40 60 80 100 trigger current - i ft (normalized) 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 i f - led forward current (ma) 110 100 v f - forward voltage (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 t a = -55 o c t a = 25 o c t a = 100 o c on-state voltage - v tm (v) -3 -2 -1 0 1 2 3 on-state current - i tm (ma) -800 -600 -400 -200 0 200 400 600 800 t a , ambient temperature ( o c) -40 -20 0 20 40 60 80 100 i drm , leakage current (na) 0.1 1 10 100 1000 10000 normalized to t a = 25 c figure 1. led forward voltage vs. forward current fig ure 3. trigger current vs. ambient temperature led trigger width - pw in ( s) 12 5102 050 100 trigger current - i ft (normalized) 0 5 10 15 20 25 normalized to: pw in 100 s figure 4. led current required to trigger vs. led pulse width figure 6. leakage current, i drm vs. temperature figure 2. on-state characteristics ambient temperature - t a ( o c) 25 30 40 60 50 70 80 90 100 static - dv/dt (v/ s) 0 2 4 6 8 10 12 static dv/dt circuit in figure 5 figure 5. dv/dt vs. temperature
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 5 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) 1. the mercury wetted relay provides a high speed repeated pulse to the d.u.t. 2. 100x scope probes are used, to allow high speeds and voltages. 3. the worst-case condition for static dv/dt is established by triggering the d.u.t. with a normal led input current, then removing the current. the variable r test allows the dv/dt to be gradually increased until the d.u.t. continues to trigger in response to the applied voltage pulse, even after the led current has been removed. the dv/dt is then decreased until the d.u.t. stops triggering. rc is measured at this point and recorded. vdc 400v (moc302x) 250v (moc301x) r = 10 k ? c test x100 scope probe pulse input mercury wetted relay r test d.u.t. d.u.t. figure 5. static dv/dt test circuit 252 v (moc302x) 158 v (moc301x) 0 volts applied voltage wa veform v max = dv/dt = 0.63 v max = 252 rc rc rc 400 v (moc302x) = 250 v (moc301x) (moc302x) = 158 rc (moc301x) figure 6. resistive load figure 7. inductive load with sensitive gate triac (i gt 15 ma) v cc r in 1 2 3 6 5 4 0.1 f 180 ? c1 2.4k ? z l 120 v 60 hz moc3010m moc3011m moc3012m v cc r in 1 2 3 6 5 4 120 v 60 hz 180 ? r l moc3010m moc3011m moc3012m note: this optoisolator should not be used to drive a load directly. it is intended to be a trigger device only.
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 6 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) figure 9. typical application circuit v cc r in 1 2 3 6 5 4 0.05 f 0.01 f load 360 ? 39 470 ? 240 vac hot ground moc3020m moc3021m moc3022m moc3023m figure 8. inductive load with sensitive gate triac (i gt 15 ma) r in v cc 1 2 3 6 5 4 0.2 f 180 ? c1 1.2 k ? z l 120 v 60 hz moc3010m moc3011m moc3012m in this circuit the ?ot?side of the line is switched and the load connected to the cold or ground side. the 39 ? resistor and 0.01? capacitor are for snubbing of the triac, and the 470 ? resistor and 0.05? capacitor are for snubbing the coupler. these components may or may not be necessary depending upon the particular and load used.
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 7 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) package dimensions 8.13?.89 6.10?.60 pin 1 64 13 0.25?.36 5.08 (max.) 3.28?.53 0.38 (min.) 2.54?.81 2.54 (bsc) (0.86) 0.41?.51 1.02?.78 0.76?.14 8.13?.89 6.10?.60 pin 1 64 13 0.25?.36 5.08 (max.) 3.28?.53 0.38 (min.) 2.54?.81 2.54 (bsc) (0.86) 0.41?.51 1.02?.78 0.76?.14 7.62 (typ.) 15?(typ.) 0.20?.30 0.20?.30 10.16?0.80 through hole 0.4" lead spacing surface mount rcommended pad layout (1.78) (2.54) (1.52) (7.49) (10.54) (0.76) 8.13?.89 note: all dimensions in mm. 6.10?.60 8.43?.90 pin 1 64 13 0.25?.36 2.54 (bsc) (0.86) 0.41?.51 1.02?.78 0.76?.14 0.38 (min.) 3.28?.53 5.08 (max.) 0.20?.30 0.16?.88 (8.13)
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 8 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) ordering information marking information option order entry identi?r (example) description no option moc3010m standard through hole device s moc3010sm surface mount lead bend sr2 moc3010sr2m surface mount; tape and reel t moc3010tm 0.4" lead spacing v moc3010vm vde 0884 tv moc3010tvm vde 0884, 0.4" lead spacing sv moc3010svm vde 0884, surface mount sr2v moc3010sr2vm vde 0884, surface mount, tape and reel moc3010 1 2 6 4 3 5 *note ?parts that do not have the ??option (see definition 3 above) that are marked with date code ?25?or earlier are marked in portrait format. de?itions 1f airchild logo 2d e vice number 3 vde mark (note: only appears on parts ordered with vde option ?see order entry table) 4 one digit year code, e.g., ? 5t wo digit work week ranging from ?1 to ?3 6 assembly package code v x yy q
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 9 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak) carrier tape specification reflow profile 4.0 0.1 1.5 min user direction of feed 2.0 0.05 1.75 0.10 11.5 1.0 24.0 0.3 12.0 0.1 0.30 0.05 21.0 0.1 4.5 0.20 0.1 max 10.1 0.20 9.1 0.20 1.5 0.1/-0 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 c time (s) 0 60 180 120 270 260 c >245 c = 42 sec time above 183 c = 90 sec 360 1.822 c/sec ramp up rate 33 sec
?005 fairchild semiconductor corporation www.fairchildsemi.com moc301xm, moc302xm rev. 1.0.1 10 tradem arks th e following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its global subsidiaries ,and is not in tended to be an exhaustive list of all such trademarks. build it now coreplus corepower crossvolt ctl current transfer logic ecospark e fficentmax ezswitch * fair child fairchild semiconductor fa ct quiet series fact f ast fa stvcore flashwriter ? fps f-pfs frfet global power resource sm green fps green fps e-series gto in tellimax isoplanar me gabuck mi crocoupler microfet mi cropak m illerdrive moti onmax mo tion-spm optologic op toplanar pdp spm powe r-spm po we rtrench powerxs pr ogrammable active droop qfet qs quiet series r apidconfigure saving our world, 1mw/w/kw at a time sm artmax smart start spm stealth s uperfet sup ersot -3 s upersot -6 s upersot -8 s upremos syncfet th ep ower franchise ti nyboost tinybuck ti nylogic tinyopto tinypower tinypwm tinywire trifault detect serdes uhc ultra frfet unifet vcx vi sualmax xs *e zswitch and flashwriter are trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fa i rchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild?s worldwide terms and conditions, specifically the warranty therein, which covers t hese products. li fe support policy fa i rchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are in tended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance wi th instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. an ti -counterfeiting policy fairchild semiconductor corporation's anti-counterfeiting policy. fairchild's anti-counterfeiting policy is also stated on our external websi te, www.fairchildsemi.com, under sales support. c ounterfeiting of semiconductor parts is a growing problem in the industry. all manufacturers of semiconductor products are experiencing counterf eiting of their parts. cu stomers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faile da pplications, and increased cost of production and manufacturing delays. fairchild is taking strong measures to protect ourselves and our customers from the proli feration of counterfeit parts. fairchild strongly encourages customers to purchase fairchild parts either directly from fairchild or from authorized fairchi ld distribu tors who are lis ted by country on our web page cited above. products customers buy either from fairchild directly or from authorized fairchild distributors are ge nuine parts, have full traceability, meet fairchild's quality standards for handling and storage and provide access to fairchild's full range of up-to-date technica land product information. fairchild and our authorized distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. fairc hild will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. fairchild is committed to combat this global problem and encou rage our customers to do their part in stopping this practice by buying direct or from authorized distributors. product status definitions defi nition of terms da tasheet identification product st atus definition ad vance information formative / in design datasheet contains the design specifi cations for product development. s pecifications may change in any manner without notice. pr eliminary first production datasheet contains preliminary data; supplementary data will be published at a later date. fairchild se mi conductor reserves the right to make changes at any time without notice to improve design. no i dentification needed full production datasheet contains final specifications. fairchi ld semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product that is discontinued by fairchild semiconductor. th e datasheet is for reference information only. rev. i38 moc301xm, moc302xm ?6-pin dip random-phase optoisolators triac driver output (250/400 volt peak)
|
